In rainy conditions, tent seams often leak, ruining your outdoor fun. But with Gear Aid™ Seam Grip + FC™ Tent Seam Sealant, you're in for a dry and enjoyable experience. This amazing sealant is designed to seal and waterproof seams on various types of outdoor gear. It's a perfect match for family-sized tents, tarps, and pop-up shelters. Just apply a thin layer to the inner seams and let it dry. Don't let the rain dampen your next outdoor escapade. Use Seam Grip + FC™ Tent Seam Sealant, a fast and permanent fix for those soggy issues. This water-based urethane seam sealer comes with a unique applicator brush that glides easily over large surfaces. It's ideal for sealing seams on polyurethane-coated fabrics like tents, tarps, and rainwear. Its fast-drying formula dries clear, leaving a flexible, odorless, and long-lasting finish. The nearly invisible non-glossy look ensures your gear stays stylish. A 59ml tube can seal seams up to about 7.3 meters with a 1.3cm bead, which is usually enough for the critical seams of an average 3 - 4 person tent. It cures in just 2 hours at room temperature, though it might take longer in colder weather. And it's proudly made in the USA.
Using Gear Aid Seam Grip + FC Fast-Curing Tent Seam Sealant is easy. First, make sure the seams of your tent or other outdoor gear are clean and dry. Then, use the unique applicator brush to apply a thin film of the sealant to the inside of the seams. Let it dry. At room temperature, it should cure in about 2 hours, but if it's colder, it'll take longer. Be patient! As for storage, keep it in a cool, dry place. When using it, make sure the area is well-ventilated, even though it's odorless. If you accidentally get it on your hands or clothes, clean it off quickly with water while it's still wet. With proper use and storage, this sealant will keep your outdoor gear waterproof for a long time.
