Rock Exotica Rock Grab

The Rock Exotica Rock Grab showcases a distinctive axle design that supports the cam. Unlike many other rope grabs with a bulky Nylock nut and bolt setup, Rock Exotica has reengineered the axle. Now, it attaches via two 2.5mm hex screws (one serves as a backup), fitting flawlessly with the milled, stainless axle. You can either thread the rope through or remove the hex bolts to attach a pre - made wirecore flipline with eyes. Remember, this rope grab isn't for withstanding severe falls. Always use it with a passive load. Never let slack enter your lanyard system as it can increase the force of any fall. It's not suitable for vertical ascent. Key features include an 180° angled cam for lanyards and wirecore fliplines, mid - line attachment for pre - made end - to - end wirecore fliplines, a low - profile design with no protruding bolts on the spindle, and it's made from CNC 4 - axis machined aluminum alloy in the USA. Specifications: It weighs 142 g, has an aluminum body, an anodized finish, an 180 - degree attachment eye, an inner eye diameter of 15.75 mm, is suitable for ropes with a diameter of 10 - 13 mm, and its Minimum Breaking Strength (MBS) depends on the rope.

Using the Rock Exotica Rock Grab is quite straightforward. First, you can choose to thread the rope through it directly. Or, if you have a pre - made wirecore flipline with eyes, you can remove the hex bolts and attach it. When using it, always make sure there's a passive load on it. Don't let any slack get into your lanyard system because this can make the force of a fall much stronger. Remember, this product isn't meant for vertical ascent, so use it only in appropriate situations. For maintenance, keep it clean and dry. Check the hex screws regularly to make sure they're tight. If you notice any signs of wear and tear, it might be time to replace the product.