Zero Auto Grab Fall Arrester Device

A Type 1 fall arrester, the mobile rope grab is a top - notch backup for rope work. It glides smoothly up and down the rope, automatically halting falls and uncontrolled slides. The toothless cams are gentle on ropes, minimizing wear. Features include: connecting to the harness via an oval connector, and a short connecting lanyard can be used. It's designed for ropes with a diameter of 11mm - 12mm and for single - person use only. There's a lever for manual override locking. It can be installed anywhere along the rope and comes with a carabiner. Rated at 15 kn and made of aluminium for durability and lightness.

Using this fall arrester is easy. First, connect it to your harness using the oval connector or a short connecting lanyard. Make sure the rope diameter is between 11mm and 12mm, as this device is designed for single - person use only. You can install it at any point on the rope. When working, it will move freely up and down. In case of a fall or an uncontrolled slide, it will automatically arrest the movement. If you need to lock it manually, use the lever. Remember, this device is rated to 15 kn, so don't exceed this limit. Keep it clean and store it in a dry place. Check the carabiner and the whole device regularly for any signs of wear or damage. If you notice any issues, don't use it and get it replaced or repaired.