The Zero Aluminum Door/Window Anchor Beam is a versatile fall protection solution. Place it on the opposite side of a door or window from the working area to establish a multi - purpose anchor point. The internal clamping within the door frame can be adjusted to fit different single - door widths. An adjustable bracing arm extends to the outside area, firmly holding the anchor beam in place. It's rated to arrest the fall of 1 person and restrain 2 people, with a load rating of 15kN. Made from lightweight aluminum, it combines strength with portability. The dimensions are 1455mm x 300mm x 200mm, and the brace arm can be adjusted up to 550mm. Available in weights of 100mm and 200mm, it weighs only 6.7kg and comes with a PVC carry bag for easy transport and storage.
Using this Zero Aluminum Door/Window Anchor Beam is easy. First, find the door or window where you'll be working. Place the anchor beam on the opposite side of the door or window from your work area. Adjust the internal clamping inside the door frame to fit the width of your single door. Then, extend the adjustable bracing arm to the outside area until the beam is firmly held in place. When using it for fall protection, make sure the load doesn't exceed the ratings: it can arrest the fall of 1 person and restrain 2 people, with a maximum load of 15kN. As for maintenance, keep it clean and dry. Check for any signs of damage, like cracks or dents, before each use. Store it in a cool, dry place using the provided PVC carry bag to protect it from the elements and potential damage.
