The Petzl Jane Lanyard L50 is a non - adjustable dynamic rope lanyard. When combined with an ABSORBICA energy absorber, it forms an I or Y energy - absorbing lanyard. This lanyard securely holds the connector in place and offers excellent abrasion protection at the ends. It can be set up as an energy - absorbing I or Y lanyard with a maximum length of two meters when paired with the ABSORBICA energy absorber. The sewn ends are shielded by a plastic sheath, which not only keeps the connector in position but also guards the ends from wear and tear. You can choose this lanyard without a connector or with a large - opening MGO connector. The large - opening, auto - locking MGO connector is permanently sewn into the lanyard termination, making it perfect for attaching to metal structures, cables, and large - diameter bars. It comes in multiple lengths: 0.6, 1, 1.5, and 2 m for JANE, and 0.6, 1, and 1.5 m for JANE MGO. The 60 - cm lanyard weighs 110 g, while the 100 - cm one weighs 130 g. It is certified with CE EN 354 and EAC.
Using the Petzl Jane Lanyard L50 is easy. First, decide if you need to attach it with the ABSORBICA energy absorber to form an energy - absorbing setup. If so, connect them properly according to the design. When choosing the connector, if you want to attach it to metal structures, cables, or large - diameter bars, go for the large - opening MGO connector. Make sure the connector is securely in place within the plastic - sheathed end of the lanyard. When using, always check the lanyard for any signs of damage, especially at the sewn ends and the connector area. Avoid exposing it to sharp objects or rough surfaces that could cause abrasion. For maintenance, keep it clean and dry. If it gets dirty, you can gently wipe it with a damp cloth. Store it in a cool, dry place away from direct sunlight and chemicals. Don't overload the lanyard beyond its capacity. If you notice any significant wear or damage, stop using it immediately and replace it with a new one.
