ZlideOn Narrow Replacement Zipper
ZlideOn offers a brilliant solution for broken zip sliders. You no longer have to ditch your favorite clothes or outdoor gear just because the zipper has stopped working.
Whether you're on an exciting tramp or in a rush to get the kids to school, ZlideOn has your back. You can rely on it to quickly fix your zipper, so you can get on with your day without any hassle.
Repairing a zipper with ZlideOn is a breeze! Simply take out the old slider that won't close, snap on your ZlideOn, and you're good to go. Crafted from top - notch steel and zinc, a zipper repair is as simple as cut, open, and click!
Instructions
- Step 1 First, remove the old zipper - slider. You can do this in various ways, like cutting it in the middle with wire cutters.
- Step 2 Make sure the ZlideOn is open. Hold the bottom part steady and pull the puller back as far as it can go. Don't use a screwdriver or similar tool to bend it open, as this might mess up its functionality.
- Step 3 Place the ZlideOn onto the zipper. If the zipper is closed somewhere, put it over the part where the zip teeth are meshed. If it's fully open, clip the ZlideOn to the starter box and then slide the insertion pin into the box.
- Step 4 Close the ZlideOn by pressing the top and bottom parts together with your fingers. Now your zipper is fixed and ready for use!
Measurements
| XXS | (W) 4.60 - 4.90mm, (H) 1.80 - 2.00mm |
| XS | (W) 5.00 - 5.20mm, (H) 2.00 - 2.25mm |
| XL | (W) 7.35 - 7.60mm, (H) 2.90 - 3.20mm |
| XXL | (W) 8.60 - 9.00mm, (H) 3.75 - 4.00mm |
Using ZlideOn is super easy. First, take out the old zipper - slider. You can cut it with wire cutters. Then, open the ZlideOn by holding the bottom part still and pulling the puller back. Don't use tools like screwdrivers to open it, as it may stop working properly. Next, put the ZlideOn on the zipper. If the zipper is closed, place it over the meshed teeth. If it's open, clip it to the starter box and slide the pin in. Finally, close the ZlideOn by pressing the top and bottom parts together with your fingers. As for maintenance, keep it dry and avoid bending it forcefully. This will ensure your ZlideOn works well for a long time.
