The Fenwicks Flow Through Bicycle Brush is a revolutionary water-fed cleaning tool. It's the very first of its kind for bikes! With a unique cone-shaped design, it can clean multiple surfaces of your bike simultaneously, making the cleaning process super quick and efficient. When connected to a hose, it continuously flushes away dirt, significantly cutting down the washing time. It features a rubberized, ergonomic handle with an on/off water switch and a quick-fit hose fitting. And guess what? You can also use it without a hose. It's about 40cm long. A couple of handy tips: Keep the water pressure low to avoid creating a fountain, and it works great on alloy wheels too.
Using the Fenwicks Flow Through Bicycle Brush is a breeze. If you want to use it with water, just connect the brush to a hose using the quick-fit hose fitting. Turn on the water with the switch on the handle, and you're ready to start cleaning. Move the brush over the different parts of your bike, and the cone-shaped design will reach multiple surfaces at once. The water will keep washing away the dirt as you clean. If you don't have a hose handy, you can still use the brush dry. Just scrub the bike as you normally would. When it comes to maintenance, after each use, make sure to dry the brush thoroughly to prevent mold and damage. Keep the water switch in good condition by not forcing it too hard. And remember, when using the water feature, keep the pressure low to avoid making a mess. This brush also works well on alloy wheels, so don't hesitate to give them a good clean too.
