Product Detail
Get a big light set at a small price! The Dayblazer 550 and Click USB Light Set is a great choice if you're looking for a simple, affordable, and bright lighting solution. The Dayblazer 550 front light has our amazing BLITZ daytime running mode, multiple mounting options, and offers excellent side visibility. Meanwhile, the Click USB rear light packs 20 lumens of bright light in a tiny package.
It's Micro - USB rechargeable, so you can charge it via any standard USB port with the included charging cable. The front light can reach up to 550 lumens, and the rear light offers 20 lumens. It only takes 3 hours to fully recharge.
The front light comes with a versatile silicone swivel mount. You can adjust it to center on the road, and it fits handlebars from 22 to 35mm and can even be strapped to some helmets. The rear light has a universal mount similar to an action - camera style, fitting most helmets and handlebars with a diameter of 22 - 35mm.
The total product weight is 81 grams, with 59g for the front light and 22g for the rear light. The run times vary depending on the mode. For the front light, Blitz mode runs for 1 hour at 550 lumens, High mode for 1.5 hours at 275 lumens, Low mode for 5 hours at 75 lumens, Pulse mode for 5.5 hours at 100 lumens, and Strobe mode for 12 hours at 65 lumens. The rear light's High mode runs for 1.5 hours at 20 lumens, and Strobe mode for 3 hours at 20 lumens.
Both lights are dust - proof. The front light meets the IP - 67 standard, which means it can be fully immersed between 15cm and 1 meter for 30 minutes. The rear light meets the IP - 65 standard, protecting it against low - pressure water jets from any direction.
Using the Blackburn Dayblazer 550 Front and Click USB Rear Bike Light Combo is easy. First, mount the lights. For the front light, use the silicone swivel mount to attach it to your handlebars (22 - 35mm) or some helmets. Just adjust it so the light shines right on the road. The rear light can be attached to helmets or handlebars using the universal action - camera - style mount.
To charge the lights, plug the included Micro - USB cable into any standard USB port. It takes about 3 hours to fully charge.
When using the lights, you can choose different modes depending on your needs. The front light has Blitz, High, Low, Pulse, and Strobe modes, while the rear light has High and Strobe modes.
Some things to note: Don't expose the lights to extremely high or low temperatures. If the lights get wet, dry them off as soon as possible. For maintenance, regularly check the mounts to make sure they're secure. Clean the lights with a soft, dry cloth to keep them looking good and working well.
