A lightweight and space - saving portable emergency hoist designed for high - altitude rescues. A pre - rigged 6 - to - 1 mechanism enables you to relieve the weight of an injured person from their fall position. Then, you can lift the person and connect them to the rescuer's system for a safe descent to the ground. It has a reduction ratio of 6, a maximum recovery height of 1 m, and can handle a working load of up to 120 kg. The breaking load is 7 kN. It weighs only 370 g. WARNING: This is not Personal Protective Equipment (PPE) and should never be the sole point of attachment for the victim. Always use it in combination with full - fledged fall arrest systems.
Using this Oyssa portable hoist is straightforward. First, make sure the pre - rigged 6 - to - 1 mechanism is properly set up. When there's an injured person at height, use the hoist to take the weight off them from their fall position. Then, carefully lift the person and connect them to your descent system. As for the weight, it can handle up to 120 kg, so don't exceed this limit. Also, remember this isn't PPE. You must always use it along with complete fall arrest systems. When it comes to maintenance, keep it dry and clean. Check the hoist regularly for any signs of wear or damage. If you notice anything wrong, don't use it until it's properly inspected and fixed.
