ZlideOn is an amazing replacement system for broken zip sliders. You no longer have to toss out your favorite clothing or outdoor gear just because the zipper has stopped working. Whether you're on an exciting tramp or in a rush to get the kids to school on time, ZlideOn has your back. It's designed to quickly and easily fix your zipper, so you can be on your way without any hassle. Made from top - quality steel and zinc, using ZlideOn is a breeze. All you need to do is remove the old slider that won't close, click on your ZlideOn, and you're good to go! It's as simple as cut, open, and click. Here are the sizes: XXS (W) 3.90 - 4.15mm, (H) 1.40 - 1.55mm; XS (W) 4.10 - 4.25mm, (H) 1.85 - 2.00mm; S (W) 4.90 - 5.10mm, (H) 2.10 - 2.30mm; M (W) 5.80 - 6.00mm, 1.85 - 2.05mm; L (W) 6.40 - 6.60mm, (H) 2.60 - 2.75mm; XL (W) 7.10 - 7.30mm, (H) 2.80 - 2.90mm; XXL (W) 10.20 - 10.50mm, (H) 4.05 - 4.30mm.
Using ZlideOn is super easy. First, take out the old zipper - slider. You can cut it in the middle with a wire cutter. Then, make sure the ZlideOn is open. Hold the bottom part still and pull back the puller as far as you can. Don't use a screwdriver or something similar to bend it open, or it might not work right. Next, put the ZlideOn on the zipper. If the zipper is closed, place it over where the teeth are meshed. If it's fully undone, clip it to the starter box and slide the insertion pin in. Finally, close the ZlideOn by pressing the top and bottom parts together with your fingers. As for maintenance, keep it dry and away from sharp objects to avoid damage. And if you have any issues, don't hesitate to reach out for help.
