ACR Firefly Pro LED Strobe Light

The brand - new ACR Firefly PRO Waterbug Emergency Distress Strobe Light is a SOLAS - approved beacon. It has a built - in water activation function that turns on automatically when submerged. With four activation modes, you can switch between the armed mode for water activation, an ultra - bright strobe, or an SOS strobe to signal your location to Search and Rescue teams. There's also a Steady - On feature for close - range recovery. The cool white LEDs emit a 360 - degree light beam over 41 candelas bright, visible from over 3.5 miles away. Thanks to the new microprocessor and energy - efficient electronics, it can work continuously for over 56 hours, 48 hours longer than SOLAS/USCG regulations and twice as long as rival products. **Features**: - SOLAS - approved strobe - Built - in water activation - Four activation modes for different signaling needs - Cool white LEDs with a 360 - degree light beam - Over 56 hours of continuous operation **Specifications**: - Product Number: 3971.3 (Bulk) - Size: 11.7 cm x 5.7 cm x 2.8 cm - Weight: 68 g (without batteries) - Operation: Manual ON/OFF switch and Water Activation - Waterproof: Factory tested to 10 m - Lamp: LED - cool white - Strobe Intensity: Minimum 26.8 Candela - Strobe Visibility: Over 3.2 miles - Strobe Flash Rate: 60 P/M +/- - Strobe Operation: Minimum 56 hours - Certification: SOLAS - Pending, USCG - Pending, IMO LSA - Pending, CE - Pending

Using the ACR Firefly Pro LED Strobe Light is easy. You can use the manual ON/OFF switch to turn it on or off. When in an emergency on water, the built - in water activation will automatically turn it on once it's submerged. To change between different modes, just toggle through the 4 activation functions. For long - distance signaling, use the ultra - bright strobe or the SOS strobe. When rescuers are close, switch to the Steady - On feature. Some things to keep in mind. This light is still awaiting SOLAS, USCG, IMO LSA, and CE certifications. Make sure to keep it dry when not in use, and avoid exposing it to extreme temperatures. For maintenance, check the battery regularly. If the light doesn't work properly after activation, replace the batteries. The light is factory - tested waterproof to 10 m, but don't submerge it deeper than that for a long time. If you notice any damage, stop using it and get it repaired or replaced.